Filter units
Filter unit with interchangeable lava fitting
Product number: 008025
The unit is usually equipped with a 45 kW electrically driven rotary piston unit. There are many power options. The unit is also available with its own diesel engine, where it can be used in applications where electricity is not available or the power supply is so low that it is not sufficient to achieve the required suction power.
Filters in three blocks and filter cleaning based on an efficient counter-mode.
The device can be easily moved between different possible destinations. The high power allows long pipe lines (over 1000 m) and very heavy loads to be vacuumed.
- The volume of the tank is 13m3.
- The filter unit is equipped with bag filters with a filter area of 30m2.
- The filter cleaning is automatically operated by the suction unit's own power, based on the counter-pressure.
- Container power from 37 to 75 kW with electric motor and different starting modes according to your needs
- HEPA13 class after-filtration as standard.
- Diesel engine power up to 300 kW.
Examples of materials to be vacuumed:
- sawdust
- peat
- moss
- sand,
- crushed stone
- clay
- wools
- concrete and brick rubble
- dust
- lecasora
- ash, etc.
Front loader filter unit
The Eurovac filter unit with front-loader adapter comes in several different models. There is a choice of containers where the suction unit is mounted in the same unit and containers where the suction unit and the filter unit are separate. Filter surface area and material according to requirements.
- Size of waste container 1,5 - 5m3
- Filter surface area 5 - 20m2
Tipping filter unit
Filter unit for central cleaning systems equipped with a 1000 l hopper. The filter unit is equipped with 63 hose filters with a total surface area of 20m2. The filter cleaning is carried out by the suction unit's own power, based on a counter-flow, in three filter blocks, individually timed. The design achieves highly efficient filter cleaning even during continuous operation. The filter section is hydraulically lifted, making it easy to empty the tank by forklift.
The unit can be combined with a variable speed drive unit up to 75 kW. The entire filter unit is also easily movable.
- Filter surface area 20m2
- Garbage container 1000 litres
- effective counter-flow filter cleaning
- Approximate dimensions (length, width, height) 2400*1200*2500
Filter units
Product number: 018030
The filter unit is intended for vacuuming fine dust, for example in bakeries. The filter cleaning is based on a suction unit with a counter-blade which allows efficient cleaning even during continuous operation.
- Counter-cleaning in two blocks.
- Dust tank 60 - 200 litres.
- Can also be placed over a larger dust container with a trap or tray feeder.
- Can also be manufactured from RST and HST materials.
- Suction unit with side channel blower 5,5 -15 kW.
Product number: 018035
- Eurovac 900 filter units are designed for use with medium sized central vacuum systems. There are few users at the same time. The filter units allow the connection of suction units with a rotary piston of up to 45 kW. The filter cleaning is based on a counter suction system developed by us. This enables efficient cleaning even during operation.
- Filter surface areas of either 10 or 15m2.
- Dust collection and emptying as required (e.g. dust bin, tipper, large bag).
- It is possible to combine different types of pre-emulsifiers with the equipment.
- The machine can be equipped with a backwashable waste bin, so you only need to empty the pre-sieve.
- Height 2700 or 3200 mm depending on the length of the filters. Diameter 1260 mm.
Product number: 018041
The Eurovac 1400 filter units are designed for larger central vacuum systems where large amounts of debris are vacuumed and several users are present at the same time.The filter units allow the connection of vacuum units with a rotary piston of up to 75 kW. The filter cleaning is based on a counter suction system developed by us. This enables efficient cleaning even during operation.
- Filter surface areas of either 32 or 24m2.
- Dust collection and emptying as required (e.g. dust bin, tipper, large bag).
- It is possible to combine different types of pre-emulsifiers with the equipment.
- The machine can be equipped with a backwashable waste bin, so you only need to empty the pre-sieve.
- Height 4500 or 4000 mm depending on the length of the filters. Diameter 1450 mm
Filter unit for hazardous waste
A filter unit developed by the Finnish Vacuum Cleaning Centre when vacuuming dirt classified as hazardous waste. For example, waste containing oil. The unit collects the dirt directly into a plastic or metal 1000 litre hazardous waste container. The container can be taken for emptying to a waste treatment plant such as Ekokem.
S90 central vacuum cleaner filter unit
A separate solid structure of the central vacuum unit Filter unit. Can be combined eg. Eurovac E100 suction unit.
Automatic pneumatic filter cleaning. The device includes your own compressor. Filter Type: cartridge. Easy to empty and spacious 100 l A stainless storage tank with its own wheels.
Maximum power of the suction unit to be connected: 350 MBAR and 16600 l/min.
Contact us!
System sales experts are happy to answer your questions
