For light dust removal from workstations and small machines
Cartridge filter units
Product number: 087521
Filter unit with cartridge filter. Suitable for small amounts of dust and air, for example in connection with grinding machines and small machine tools. Also suitable as a filter unit for central grinding machines if the pressure is below 350 mbar. Can also be equipped with a trap feeder for discharge into a garbage chute or large bag.
The unit is also used for filtering welding gases. Filters are selected as required.
For more information:
- air flow min/max: 750/1500 m³/h
- filter area paper/polyester: 40/14 m²
- cartridges 1 piece
- waste bin 50 l, also other options
- vacuum resistance: 35000 Pa
- dimensions approx. height*width*depth: 1880 x 600 x 730 mm
- joints d. 158,5 mm
- weight: 350 Kg
- pressure-air requirement: 0,75-0,20m3/min and 5 bar
Product number: 087512
Filter unit with cartridge filters. Cleaning of the filters by means of a compressed air jet at adjustable intervals or based on the pressure difference. Suitable for filtration of various flue gases in different industrial processes. Standard with 50 litre dust tank. Filters selectable according to requirements
For more information:
- air flow min/max: 1500/3000 m3/h
- filter area paper/polyester: 80/36 m2
- cartridges 2 pieces
- waste bin 50 l, also other options
- vacuum resistance: 30000 Pa
- dimensions approx. height*width*depth: 2450*880*1160 mm
- joints d. mm 250
- weight: 400 Kg
- pressure-air demand: Nm3/min /bar 0,05-0,15/5
Product number: 087502
Filter unit with cartridge filters. Cleaning of the filters by means of a compressed air jet at adjustable intervals or based on the pressure difference. Suitable for filtration of various flue gases in different industrial processes. Standard with 50 litre dust tank. Filters selectable according to requirements
For more information:
- air flow min/max: 2000/6000 m3/h
- filter area paper/polyester: 80/36 m2
- Cartridges 4 pieces
- waste bin 50 l, also other options
- vacuum resistance: 30000 Pa
- dimensions approx. height*diameter: 2620*1250 mm
- joints d. mm 400
- weight: 550 Kg
- pressure-air demand: Nm3/min /bar 0,1-0,25/5
Product number: 087506
Filter unit with cartridge filters. Cleaning of the filters by means of a compressed air jet at adjustable intervals or based on the pressure difference. Suitable for filtration of various flue gases in different industrial processes. Standard with 50 litre dust tank. Filters selectable according to requirements.
For more information:
- air flow min/max: 2500/10000 m3/h
- filter area paper/polyester: 212/96 m2
- cartridges 4 pieces
- waste bin 50 l, also other options
- vacuum resistance: 30000 Pa
- dimensions approx. height*diameter: 3150*14000 mm
- joints d. mm 400
- weight: 5600 Kg
- pressure-air demand: Nm3/min /bar 0,1-0,25/5
Product number: 087531
A cartridge filter unit with a specially designed gravity fed dusty air inlet. In addition, the unit has built-in baffles that protect the cartridges from wear and evenly distribute the air to the filter. The filter is equipped with an efficient filter cleaning system based on compressed air blasting. If the dust load is high, it is recommended to use a polyester filter instead of a paper filter.
There are several models depending on the filter surface area, up to 350.000 m3 air volume. The unit can be equipped with a dust container or a shut-off feeder.
For more information:
- Air flow min/max: 6000/350000 m3
- Filter area 144 - 2900 m2
- Cartridges 12 - 240 pieces
- Bin 50 l, also other options
- vacuum resistance 3000 - 4000 Pa
For filtering fine dust and welding fumes in production areas
Iperjet DF series
Product number: 210956
The Iperjet DF filtration unit is equipped with horizontal cartridge filters suitable for sucking and filtering welding fumes and fine and coarse dusts. The filtration unit consists of a single pre-chamber where most of the dust is separated and dripped into the first collection tank. The air then passes to a labyrinth which, with efficient filters, removes the remaining contaminants before returning the air to the work area.
A high-performance blower, located at the top of the unit, ensures high suction power and low noise levels. The pneumatically adjustable cleaning system achieves very high reliability and filtration performance of the filter cartridges. See brochure for technical specifications.
Call us and ask for our offers on different models.
Mobile filtration unit for welding gas extraction
Welding gas extractor CleanGo 2015
Product number: 210752
The redesigned CleanGo 2015 is an efficient mobile suction and filtration unit for welding gases and other vapours. In addition to a filtration efficiency of over 99%, activated carbon also filters odours almost completely, thus improving the quality of the working environment.
Not suitable for filtering RST or aluminium welding gases. For this we recommend the Cleaning DF model with Hepa filtration.
Its compact size makes it suitable for applications where space is limited and a powerful filtration unit is required. In addition, by filtering the extracted air back into the working space, significant savings in heating costs can also be achieved in winter. The unit is equipped with a high quality 3 m Dynaflex suction hose. In addition, a flap on the suction arm allows the suction power can be adjusted as required.
For more information:
- Dimensions: H 790 W 720 mm.
- Weight: 101 kg
- Sound level: 76 dB
- Air flow: 1400 m3/h
- Power: 1,1 kW
Contact us!
System sales experts are happy to answer your questions
