The Noil filtration unit is designed to remove oil mist from work areas and thereby allow the collected oil to be recycled. The unit is used in lathes, threading and machining centres, printing machines, greasing machines, etc. The Noil oil mist collector is not suitable for fume extraction. The BIA USG C-rated cellulose pre-filter and polyester filter ensure 98% average filtration of oil particles. The filtered oil collects in the unit and exits through the oil drain connection, ensuring almost complete oil recovery. The oil outlet pipe must always be connected to the collection container in an airtight manner.
The Noil oil mist separator should be sized according to the machine tool to be connected to it, as follows. The air should be changed at least 200 times per hour, e.g. inside a CNC machine, i.e. a minimum flow of 200 m³/h is required per cubic metre.
If the dimensions of the CNC machine are e.g. 1.2 m x 1.5 m x 2 m, the volume of the machine is 3.6 m³. Therefore, a minimum air flow of 720 m³/h is required (200 m³/h x 3,6 = 720 m³/h). In this case, the Noil 08 would be a suitable Noil oil mist extractor with a maximum air flow of 800 m³/h.
After-filter kit available as an option
Noil 08 (Product No: 2122655) and Noil 15/26 (Product No: 212266)
