Product descriptions of models
Radial blowers
Centrifugal blowers
Side channel blowers
Rotary piston blowers
Axial blowers
ATEX blowers
Accessories
Radial blowers
Centrifugal blowers
Side channel blowers
Rotary piston blowers
Axial blowers
ATEX blowers
Accessories
We offer a comprehensive range of side duct, centrifugal and axial fans for many industrial needs.
More than 1000 models in the selection. We also keep the most common models in stock. Also Special fans such as ATEX fans, heat resistant and corrosive fans.
In our representation e.g.
Eurovac MB series blowers are designed for transmitting clean air, e.g. for machinery cooling. Blowers are made out of epoxy coated steel with forward curved blade radial impeller. Maximum temperature of transmitted air 130°C. With extra heat sink can be used transmitting air up to to 250°C. Thus blower should be air cooled after the use to prevent motor damages. Maximum operation temperature 50°C with single phase motor and 60°C with three phase motor.
Eurovac MB P/R series blowers are designed for transmitting material but not textile fiber. Blowers are made out of epoxy coated steel. Radial blade impeller is also out of steel.
Air to be transmitted can be 130°C. Maximum operating temperature 60°C.
With extra heat sink can be used transmitting air up to to 250°C. Thus blower should be air cooled after the use to prevent motor damages.
Eurovac MBCA Series blowers are designed transmitting clean air and vapor at low pressure. Blowers and radial impellers are made of Fe360 Carbon steel. Blower case is qualicoat polyester powder coating has heat resistance up to +180°C. Impeller coating has momentary heat resistance up to +300°C. Maximum temperature of air to be transmitted +130°C, operating temperature +60°C.
Eurovac MBR series blowers are designed for transmitting clean or slightly dusty air. Blower case is made out of epoxy coated steel. Back-ward curved impeller out of galvanized steed. Maximum temperature of air to be transmitted is 130°C. With extra heat sink can be used transmitting air up to to 250°C. Thus blower should be air cooled after the use to prevent motor damages. Maximum operation temperature with one phase motor 50°C and with three phase motor 60°C.
Eurovac MBRLP Series blowers are designed for paint booth exhauster or machinery cooling. Blower and radial impeller are epoxy coated steel. Blowers case has a maintenance hatch. Maximum temperature of air to be transmitted +130°C, operating temperature +60°C.
Eurovac MBRM series blowers are designed for suction and transmitting of dusty air or air with granulated particles. Blowers and radial impellers are made of Fe360 Carbon steel. Blower case is qualicoat polyester powder coating has heat resistance up to +180°C. Impeller coating has momentary heat resistance up to +300°C. Maximum temperature of air to be transmitted +130°C, operating temperature +60°C.
Eurovac MDI Series blowers are designed for transmitting clean or corrosive air, for example for machinery cooling. MDI blowers are made out of stainless steel (AISI 304) and have forward curved radial impeller. Maximum temperature of transmitted air is 130°C. With extra heat sink can be used transmitting air upto to 250°C. Thus blower should be air cooled after the use to prevent motor damages. Maximum operation temperature 50°C with single phase motor and 60°C with three phase motor.
Product code 220311
Portable centrifugal blower is designed for suction and extraction of fumes, gases, dirty air and light dust. DF/S blowers are great when fast, simple and temporary blower is needed. Available with 1-phase or 3-phase motor. Air temperature for continuous use from -20°C to +60 °C.
Product code 200039
Product code 220706
Blowers with forward curved blades for pneumatic transportation systems for combination of air and solid material. Also for fibrous material like paper and textile cutting waste.
Available also customized ATEX approved, belt-driven and special material models. Continuous heat resistance from -20°C to +60 °C, under request even wider.
Model | Power kW | Underpressure pA | Air flow m3/h |
---|---|---|---|
DA 400/P2 | 0,75 | 2850 | 360 |
PDA 400/P2 | 1,10 | 2850 | 792 |
PDA 450/P2 | 1,10 | 3550 | 468 |
PDA 450/P2 | 1,50 | 3550 | 792 |
PDA 500/P2 | 2,20 | 4550 | 900 |
PDA 500/P2 | 3,00 | 4550 | 1296 |
PDA 560/P2 | 3,00 | 5750 | 720 |
PDA 560/P2 | 4,00 | 5750 | 1296 |
PDA 630/P2 | 5,50 | 7200 | 1296 |
PDA 630/P2 | 7,50 | 7200 | 2124 |
PDA 710/P2 | 7,50 | 9300 | 1044 |
PDA 710/P2/2 | 11,00 | 9300 | 2124 |
PDA 800/P2R | 11,00 | 10700 | 1872 |
PDA 800/P2 | 15,00 | 11900 | 1872 |
PDA 800/P2 | 18,50 | 11900 | 2664 |
Product code 220754
Blowers with forward curved blades for pneumatic transportation systems for combination of air and solid material. Also for fibrous material like paper and textile cutting waste.
Available also customized ATEX approved, belt-driven, higher and special material models. Continuous heat resistance from -20°C to +60 °C, under request even wider.
Product code 220802
Blowers with radial blades for pneumatic transporting systems for transmitting air and solid materials. Also for fibrous material like paper and textile cutting waste.
Available also customized ATEX approved, belt-driven, higher and special material models. Continuous heat resistance from 20°C to +60 °C, under request even wider temperature range.
Model | Power kW | Underpressure pA | Air flow m3/h |
---|---|---|---|
PDC 250/2R1 | 4,0 | 2140 | 3600 |
PDC 250/2R2 | 5,5 | 2390 | 3950 |
PDC 280/2 | 7,5 | 2680 | 4700 |
PDC 280/2R1 | 7,5 | 3080 | 5400 |
PDC 280/2 | 11,0 | 3500 | 6500 |
PDC 320/2R1 | 11,0 | 4090 | 5400 |
PDC 320/2R1 | 15,0 | 4190 | 9000 |
PDC 320/2 | 22,0 | 4590 | 10800 |
PDC 360/2R1 | 22,0 | 5060 | 10000 |
PDC 360/2 | 30,0 | 5500 | 12600 |
Blowers with forward curved blades for pneumatic transportation systems for combination of air and solid material. Also for fibrous material like paper and textile cutting waste and saw dust and gravings mixed with air.
Available also customized ATEX approved, belt-driven and special material models. Continuous heat resistance from -20°C to +60 °C, under request even wider.
Model | Power kW | Underpressure pA | Air flow m3/h |
---|---|---|---|
PDM 220/2 | 0,37 | 750 | 360 |
PDM 250/2R | 0,55 | 840 | 792 |
PDM 250/2 | 0,75 | 950 | 468 |
PDM 280/2R | 1,10 | 1040 | 792 |
PDM 280/2 | 1,50 | 1180 | 900 |
PDM 400/2R | 5,50 | 2100 | 4320 |
PDM 400/2 | 7,50 | 2400 | 6120 |
PDM 450/2 | 11,00 | 3000 | 8280 |
PDM 500/2R | 15,00 | 3300 | 8280 |
PDM 500/2 | 22,00 | 3780 | 11880 |
Product code 220402
Blowers with backward curved blades for transmitting clean and slightly dirty air in low pressure. PR series blowers are designed for industrial use, buildings, ventilation systems and painting booths and rooms.
Model | Power kW | Underpressure pA | Air flow m3/h |
---|---|---|---|
PR 250/2 | 0,55 | 870 | 2700 |
PR 280/2 | 1,10 | 1100 | 3850 |
PR 320/2 | 2,20 | 1390 | 5400 |
PR 360/2 | 3,00 | 1850 | 7650 |
PR 400/2 | 4,00 | 2130 | 9500 |
PR 400/2 | 5,50 | 2310 | 12000 |
PR 450/2 | 7,50 | 2690 | 13500 |
PR 450/2 | 11,00 | 2920 | 17000 |
PR 500/2 | 15,00 | 3350 | 19000 |
PR 500/2 | 18,50 | 3700 | 24200 |
Product code 003040
PRA blowers with forward curved blades for pneumatic transportation systems for combination of air and solid material. Can be used for saw dust and shavings removal when pre-separator is used filtering material before blower inlet.
Available also customized ATEX approved, belt-driven and special material models. Heat resistance in continuous use from -20°C to +60 °C, under request even wider.
Model | Power kW | Underpressure pA | Air flow m3/h |
---|---|---|---|
PRA 250/2 | 2,2 | 2240 | 3050 |
PRA 250/2 | 3,0 | 2680 | 4750 |
PRA 280/2 | 4,0 | 2970 | 4250 |
PRA 280/2 | 5,5 | 3410 | 6850 |
PRA 320/2 | 7,5 | 3750 | 6150 |
PRA 320/2 | 11,0 | 4340 | 9500 |
PRA 360/2 | 11,0 | 4680 | 8500 |
PRA 360/2 | 15,0 | 5360 | 13500 |
PRA 400/2 | 22,0 | 6190 | 12000 |
PRA 400/2 | 30,0 | 7070 | 19000 |
PRA 450/2 | 37,0 | 7950 | 17000 |
PRA 450/2 | 45,0 | 9120 | 27000 |
PRA 500/2 | 75,0 | 10140 | 24200 |
PRA 500/2 | 90,0 | 11550 | 38200 |
Product code 220507
Blowers with backward curved blades for sawdust and shavings removal systems and suction and transport of granular material. Not for fibrous material.
Available also customized ATEX approved, belt-driven and special material models. Continuous heat resistance from -20°C to +60 °C, under request even wider.
Model | Rated power kW |
Pressure drop pA |
Air flow m3/h |
---|---|---|---|
PRM 130/2 | 0,18 | 750 | 830 |
PRM 180/2 | 0,25 | 880 | 1330 |
PRM 180/2 | 0,37 | 1020 | 1330 |
PRM 200/2 | 0,55 | 1130 | 1900 |
PRM 200/2 | 0,75 | 1300 | 1900 |
PRM 220/2 | 1,10 | 1440 | 2700 |
PRM 220/2 | 1,50 | 1650 | 2700 |
PRM 250/2 | 1,50 | 1840 | 3850 |
PRM 250/2 | 2,20 | 2100 | 3850 |
PRM 280/2 | 3,00 | 2420 | 6150 |
PRM 280/2 | 4,00 | 2770 | 6150 |
PRM 320/2 | 5,50 | 3050 | 8500 |
PRM 320/2 | 7,50 | 3500 | 8500 |
PRM 360/2 | 11,00 | 3920 | 12000 |
PRM 360/2 | 15,00 | 4480 | 12000 |
PRM 400/2 | 18,50 | 4890 | 17000 |
PRM 400/2 | 22,00 | 5610 | 17000 |
Product code 220555
PRU series blowers with backward curved blades for pneumatic transportation systems, dryer systems, saw dust, shavings and granular particle removal. Not for fibrous materials.
Available also customized ATEX approved, belt-driven, higher and special material models. Continuous heat resistance from -20°C to +60 °C, under request even wider.
Model | Power kW | Underpressure pA | Air flow m3/h |
---|---|---|---|
PRU 250/2 | 0,37 | 920 | 1330 |
PRU 280/2 | 0,55 | 1230 | 1700 |
PRU 310/2 | 1,10 | 1530 | 2700 |
PRU 350/2 | 2,20 | 1920 | 3450 |
PRU 400/2 | 4,00 | 2540 | 5400 |
PRU 450/2 | 7,50 | 3180 | 7650 |
PRU 500/2 | 11,00 | 3970 | 10800 |
PRU 560/2 | 15,00 | 4020 | 13500 |
PRU 560/2 | 18,50 | 5080 | 13500 |
PRU 630/2 | 30,00 | 5430 | 19000 |
PRU 630/2 | 37,00 | 6530 | 21600 |
Product code 220954
PRVM series blowers for pneumatic conveying systems for combination of air and solid material. Can be used for saw dust and shavings removal when pre-separator is used filtering material before blower inlet.
Available also customized ATEX approved, belt-driven and special material models. Heat resistance in continuous use from -20°C to +60 °C, under request even wider.
Model | Power kW | Underpressure pA | Air flow m3/h |
---|---|---|---|
PRVM 350/N2R1 | 0,75 | 2200 | 1296 |
PRVM 350/N2 | 1,10 | 2500 | 1656 |
PRVM 400/N2R1 | 1,50 | 2700 | 1872 |
PRVM 400/N2 | 2,20 | 3100 | 2376 |
PRVM 450/N2R1 | 3,00 | 3450 | 2664 |
PRVM 450/N2 | 4,00 | 3950 | 3384 |
PRVM 500/N2R1 | 4,00 | 4400 | 3384 |
PRVM 500/N2 | 5,50 | 4950 | 4680 |
PRVM 560/N2R1 | 7,50 | 5500 | 4680 |
PRVM 560/N2 | 11,00 | 6100 | 6840 |
PRVM 630/N2R1 | 15,00 | 6900 | 6840 |
PRVM 630/N2 | 18,50 | 7750 | 9360 |
PRVM 710/N2R1 | 22,00 | 8850 | 8280 |
PRVM 710/N2 | 30,00 | 9900 | 11988 |
PRVM 800/N2R1 | 37,00 | 10800 | 11988 |
Product code 221259
High-pressure centrifugal fan, suitable for e.g. pneumatic conveyor systems, central vacuum systems, foundries, drying systems, the food industry and various vacuum systems in the chemical industry. ATEX-approved, V-belt and special material models are also available. Heat resistance continuous -20 / + 60 degrees, higher on special order.
Model | Rated power kW |
Pressure drop pA |
Air flow m3/h |
---|---|---|---|
VAPE 400/N2 | 1,1 | 2950 | 792 |
VAPE 400/N2 | 1,1 | 3750 | 900 |
VAPE 400/N2 | 1,5 | 3750 | 1152 |
VAPE 500/N2R1 | 1,1 | 3950 | 648 |
VAPE 500/N2R1 | 1,5 | 3950 | 1008 |
VAPE 500/N2 | 1,5 | 4650 | 792 |
VAPE 560/N2R1 | 1,5 | 4900 | 720 |
VAPE 560/N2 | 2,2 | 5900 | 900 |
VAPE 560/N2R1 | 2,2 | 4950 | 1152 |
VAPE 500/N2 | 2,2 | 4650 | 1440 |
VAPE 560/N2R1 | 3,0 | 5100 | 1620 |
VAPE 560/N2 | 3,0 | 6050 | 1296 |
VAPE 560/N2 | 4,0 | 6050 | 2160 |
VAPE 630/N2 | 5,5 | 7550 | 1836 |
VAPE 710/N2 | 7,5 | 8400 | 2340 |
VAPE 630/N2 | 7,5 | 7550 | 2988 |
VAPE 710/N2 | 11,0 | 9500 | 2988 |
VAPE 710/N2 | 15,0 | 9500 | 4716 |
VAPE 800/N2 | 15,0 | 12900 | 2988 |
VAPE 800/N2 | 18,5 | 12900 | 4212 |
VAPE 800/N2 | 22,0 | 12900 | 5328 |
Product code 252103
Eurovac G2 series side channel blowers have high suction and blow pressure with low noise level. The most effective models can reach 2500 m³/h air flow and 780 mbar pressure. Eurovac G2 series blower are highly reliable and almost maintenance free. They are designer for continuous use. Maximum vacuum air temperature 40°C.
Datasheet of specifications (50 Hz frequency) of models in store.
FPZ MD series blowers have high quality finish aluminum case. Blower air flow is 30-472 m³/h and pressure 200-750 mbar. Vacuum air flow is 30-472 m³/h and pressure 150-500 mbar.
FPZ MD blower operation temperature can vary from -15 to +40 °C.
Product code 151605
FPZ MS blowers have high quality finish aluminum case. Blower air flow is 55-1022 m³/h and pressure 125-500 mbar. Vacuum air flow is 55-1022 m³/h and pressure 82-350 mbar.
FPEZ MS blower operation temperature can vary from -15 to +40 °C.
FPZ TD blowers have high quality finish aluminum case. Blower air flow is 139-1007 m³/h and pressure 175-600 mbar. Vacuum air flow is 139-1007 m³/h and pressure 175-500 mbar.
FPZ TD blowers operation temperature can vary from -15 to +40 °C.
Product code 252105
Eurovac G2 series side channel blowers have high suction and blow pressure with low noise level. The most effective models can reach 2500 m³/h air flow and 780 mbar pressure. Eurovac G2 series blower are highly reliable and almost maintenance free. They are designer for continuous use. Maximum vacuum air temperature 40°C.
Datasheet of specifications (50 Hz frequency) of models in store.
Model | Power kW | Underpressure mbar | Airflow m3 / h | Sound level dB | Weight kg | Brochure |
---|---|---|---|---|---|---|
2-510-7AA21 | 1,5 | 190 | 210 | 64 | 24 | Lataa tiedot |
2-710-7AH26 | 3,0 | 270 | 318 | 69 | 36 | Lataa tiedot |
2-810-7AH07 | 4,0 | 200 | 530 | 70 | 54 | Lataa tiedot |
2-810-7AH27 | 7,5 | 320 | 520 | 70 | 66 | Lataa tiedot |
2-820-7HH37 | 11,0 | 430 | 520 | 74 | 104 | Lataa tiedot |
2-910-7AH17 | 12,5 | 280 | 1050 | 74 | 116 | Lataa tiedot |
2-930-7AH37 | 18,5 | 310 | 1370 | 75 | 131 | Lataa tiedot |
2-920-7HH47 | 25,0 | 440 | 1110 | 74 | 211 | Lataa tiedot |
2-943-7BH47 | 25,0 | 310 | 2050 | 75 | 235 | Lataa tiedot |
Product code 151610
FPZ MS/TS/SH blowers high quality finish aluminum case.
FPZ blowers have air flow up to 2600 m³/h and vacuum 375 mbar pressure drop.
FPZ MS/TS/SH blowers operating temperature range is from -15 to +40 °C.
FBZ side channel blowers are ideal for:
Independent Eurovac rotary piston blower systems are independent suction and blower unit. Systems have high quality Roots pump, electric motor, belts, noise reduction and installing platform. Under request available with extra noise reduction and case. The most common models 37 and 45 kW are in store.
Systems are used as a suction/blower unit in even hundreds of meters long central cleaning system pipelines. Rotary piston unit is recommended with heavy waste streams.
Units can be customized up to 200 kW power.
Model | Rated power kW |
Pressure drop pA |
Air flow m3/h |
Weight kg |
---|---|---|---|---|
ZG-80V | 15 | 490 | 760 | 590 |
ZG-100V | 30 | 490 | 1310 | 700 |
(*)ZG-125V | 37 | 490 | 1960 | 1260 |
(*)ZG-150V | 45 | 490 | 2400 | 1680 |
ZG-175V | 75 | 490 | 3960 | 2420 |
ZG-200V | 75 | 490 | 4750 | 3000 |
ZG-250V | 110 | 490 | 6590 | 3200 |
ROBOX evolution is a complete blower unit with RBS series blower and Sentinel monitoring system that is monitoring the blower operation and preventing failures. Optimal design makes ROBOX evolution affordable and easy to maintenance.
Available ATEX II classified Robox Biogas and selection of CRBIO and GRBIO models for wastewater treatment plants and biogas plants.
RB-DV series of rotary piston blowers designed to be used as exhauster, without overheating thanks to a Robuschi patented atmospheric air injection device.
RB-VDV series includes six models that under request can be delivered ATEX approved.
Product code 252402
RBS is an innovative three lobe rotary positive displacement blower equipped with a special LOW PULSE system to reduce pressure pulsations up to 2% under the vacuum pressure.
Product code 200011
RBS is an innovative three lobe rotary positive displacement blower equipped with a special LOW PULSE system to reduce pressure pulsations up to 2% under the vacuum pressure.
Product code 200081
HI Series includes six model of blower diameter 350 – 710 mm with 2, 4 or six pole single or three phase motors. Air flow 2900m³/h – 27060m³/h. Maximum air temperature 50°C (single phase motor) or 60°C (three phase motor). HI series blowers are for situations portability is needed e.g.
Under request available with flame proof blower and ATEX standard motor.
Product code 200015
HJBM Series includes five models of blowers diameter 350-560 mm with 2, 4 and 6 pole single or three phase motor. Motor power range 0,09-0,55 kW. Air flow range 2850-11500 m3/h.
Motor case made out galvanized steel and radial impeller out of glass fiber-reinforced polyamide. Under request blower is available also with aluminum radial impeller. Wall amount blower is designed for air conditioning in smaller building and industrial plants. Maximum air temperature 50°C (single phase motor) or 60°C (three phase motor).
Eurovac MAX series blowers are designed for transmitting air in ATEX certified II3G/D zones ( 1, 2 for gas-vapor-mist and 22 for dust) that must be protected from effective sources of ignition.
Wall mount HMX series blowers are built to meet the standards 94/9/CE. Blowers are epoxy coates steel and have an aluminum radial impeller. Blower can be used in temperature range 20-80°C.
Product code 200400
Eurovac MBX series blowers are designed for transmitting air in ATEX certified II3G/D zones ( 1, 2 for gas-vapor-mist and 22 for dust) that must be protected from effective sources of ignition. MBX series blowers are built to meet the standards 94/9/CE.
Blowers are epoxy coates steel and have a forward curved aluminum radial impeller.
Blowers pipe fitting is sparkles made out of either copper or aluminum. Maximum temperature of transmitted air is 80°C.
Depending on the models, the maximum air volumes are 1600-18000 m³ / h. and motors 2.2-110 kW.
Air volumes 790-7500 m³ / h and engine powers 1.5 – 37 kW
Air volumes approx. 6000 – 145000 m³ / h j motor sizes 0.25 – 15 kW
Air volumes 770 – 46000 m³ / h. Engine 0.18 – 55 kW
Air volumes 245 – 12400 m³ / h. Engines 0.08 – 11 kW
Air volumes between 2300 and 40000 m³ / h and motor sizes 0.37 – 15 kW
Air volumes 310 – 5900 m³ / h. Engine sizes 0.12 – 2.2 kW
Air volumes 560 – 6000 m³ / h and motors between 0.12 and 2.2 kW
Flexible connection for connecting a fan. Heat resistance 400 ° C / 2h. Size options 100mm – 1250mm.
The Eurovac BAC connection allows an angular BOX fan to be connected to a round duct. There are 17 sizes available: 250mm – 600mm. Heat resistance -50 to + 200 ° C continuous and + 400 ° C / 2h.
Allows a vibration-free connection to the round duct. Available in 21 sizes from 80mm to 1250mm. Heat resistance -50 to + 200 ° C continuous and + 400 ° C / 2h.
Made in Italy, high-quality FPZ silencers are the solution for applications where blowing or intake air silencing is required.
See the brochure in the lower corner for more information on the different models and size options.
Intake air filters for side duct fans. Several different designs and material options.
Connecting pipes and fittings for side duct fans. T-Branches, Pipe Fittings, Filter Fittings.
High quality Italian FPZ under pressure and over pressure meters.
Non-return valves for side duct fans. Prevents air from returning to the fan.
Factory-fitted damper housings for FPZ side duct fans. Several different sizes and designs.
Factory-fitted damper housings for FPZ side duct fans. Several different sizes and designs.
The Eurovac JE-45 tape allows a flexible connection from the fan to the pipe. The strip has two 45mm wide metal strips with a 60mm wide flexible flange in between. Continuous heat resistance max + 200 ° C and + 400 ° C / 2h.
A wide range of connectors is available for Eurovac fans, depending on the size and model of the fan.
Eurovac shutters are available in different sizes made of aluminum or plastic. A model made of galvanized steel with a temperature resistance of 400 ° C / 2h is also available.
Different protective nets are available for the fans on the inlet and outlet side, depending on the model and size.